Sourcing Disposable coveralls in Mexico sounds simple. Then you’re three weeks deep in supplier emails, conflicting certifications, and sample requests that lead nowhere.

The Mexican PPE market has grown fast. But the gap between a truly compliant disposable coverall manufacturer and one that claims compliance is still wide—and the risk is real.

Your needs might vary:

• Stocking SMS workwear for construction crews

• Specifying Type 5/6 chemical protective suits for petrochemical sites

• Finding an OEM partner for private-label runs with reasonable MOQs

Whatever the case, your supplier choice matters. The right one protects your operation. The wrong one puts it at risk.

This guide profiles six real disposable coverall manufacturers . It benchmarks each one across compliance depth, customization flexibility, cost, and reliability. You’ll walk away with a shortlist—not just a pile of information.

1. MEDEV

MEDEV (Medical Devices Corporation) is not a disposable coverall manufacturer. It’s not a PPE producer. It has no place on any shortlist of SMS coverall manufacturers or chemical protective coverall suppliers for Mexico.

MEDEV is a Philippine-based medical equipment distributor. They’re based in Parañaque, Metro Manila, and have been operating since 1999. Their business focuses on high-cost clinical hardware—echocardiography systems, diagnostic imaging platforms, and cardiology equipment. They’ve installed thousands of medical machines across Philippine hospitals. Their CEO has 20+ years of medical device sales experience. By every measure, they’re a credible company in that space.

That space has nothing to do with disposable PPE suits, non-woven coverall production, or Type 5/6 chemical protective clothing.

Here’s what’s clear about MEDEV:

• No verified presence in Mexico

• No evidence of coverall manufacturing or nonwoven material processing

• No EN/NFPA certification activity

• No OEM or private-label capability tied to PPE procurement

Bottom line for PPE buyers: MEDEV showed up in your supplier research by mistake. A search indexing overlap around “medical” or “protective equipment” pulled it in. Drop it from your evaluation list. Spend that time on verified ISO-certified coverall manufacturers with documented compliance credentials instead.

2. Grupo Alyger

Grupo Alyger has been manufacturing disposable protective clothing in Mexico since 2005. That’s nearly two decades of domestic production. Most competitors back then were importing and relabeling. Alyger was building locally.

Headquartered in Guadalupe, Nuevo León, the company operates from the Parque Industrial Promofisa zone. That location matters. Nuevo León is Mexico’s industrial core. It puts Alyger close to the manufacturing clusters, petrochemical corridors, and food processing facilities that consume PPE at real volume.

Their products cover four sectors: industrial, medical, food processing, and general consumer. For PPE buyers, the industrial and medical lines are the ones worth your attention.

A few things to know before procurement:

• Medical-grade products carry sanitary registration — a clear compliance signal for healthcare and pharmaceutical buyers working under COFEPRIS requirements

• They hold immediate-availability inventory — useful for urgent shutdowns or unplanned maintenance events that can’t wait on lead times

• They back a distributor network with preferential commercial terms — worth considering for regional resellers or private-label operators who need a reliable domestic supply source

What Alyger is: A verified Mexican non-woven coverall producer with real domestic operations, multi-sector product lines, and a commercial structure that works well for distributors.

What Alyger isn’t: A source of EN Type 3/4 chemical protective suits or NFPA-certified hazmat gear. Deep chemical splash resistance or cross-border compliance documentation? You’ll need a supplier higher up the certification chain.

Industrial workwear buyers, food-sector safety coordinators, and distributors who need a domestic disposable PPE suit factory with solid inventory depth — Alyger is worth a serious look.

3. Overol Master

León, Guanajuato, isn’t just Mexico’s shoe capital. It’s also home to one of the country’s focused disposable coverall manufacturers — a company that does what its name says.

Overol Master is a 100% Mexican-owned PPE manufacturer. They produce in León. They sell B2B. Their product line stays tight: Disposable coveralls (overoles desechables), surgical gowns , face masks , and boot covers — the core kit for industrial, medical, and agri-food operations.

That focus matters. This isn’t a general workwear supplier that dabbles in PPE. Their whole identity centers on disposable and reusable protective garments. These products serve environments where contamination control is non-negotiable — production lines, processing plants, and clinical settings.

What the product structure tells you:

• Primary coverage: light-duty disposable PPE for hygiene-critical environments

• Secondary line: reusable protective garments for ongoing operational needs

• Target sectors: industrial, healthcare, agri-food processing

Their wholesale contact page (“Contacto Mayoristas”) makes the business model plain: bulk B2B orders, not retail units.

Where Overol Master fits — and where it doesn’t:

You’re a distributor stocking non-woven coverall producers, or a food-sector safety manager who needs a reliable domestic source with short lead times. Overol Master is a practical option. Mid-volume orders from comparable Mexican manufacturers typically ship in 1–4 weeks within the country.

What you won’t get: EN Type 5/6 certification documents, NFPA-rated chemical protection, or cross-border compliance coverage. Your RFQ needs verified Type 5/6 coverall manufacturers with full CE dossiers? Look further up the chain.

Buyer fit: Mexican regional distributors, food processing safety managers, and healthcare procurement teams sourcing standard disposable PPE at volume — this is a solid domestic source worth a direct inquiry.

4. GHC Industrial

Let’s be direct: GHC Industrial (GHC Industries) is not a disposable coverall manufacturer.

It’s a US-based private investment and industrial holding platform. The company buys legacy manufacturing and healthcare businesses, injects capital, and modernizes operations using AI and Industry 4.0 tools. Their December 2025 leadership expansion shows an active growth phase — not the profile of a mature PPE supplier with stocked inventory and CE certification dossiers.

Their stated focus areas are:

• Manufacturing turnaround — buying underperforming industrial companies and upgrading them with capital and operational improvements

• Healthcare vertical — building technology and clinical solutions for hospital systems

• Reshoring and automation — using AI-driven optimization across their portfolio companies

No public evidence shows GHC operating as a non-woven coverall producer. They hold no EN Type 5/6 certifications. They offer no OEM or private-label PPE to third-party buyers.

GHC does connect to the PPE world — but on the demand side, not the supply side. Their manufacturing portfolio may include industrial facilities in Mexico. Those plants are PPE consumers , not suppliers. Standard benchmarks put annual PPE spend at USD 80–200 per worker per year in heavy manufacturing environments.

Bottom line for PPE buyers: GHC Industrial is not a disposable coverall supplier. It showed up due to keyword overlap around “industrial” and “manufacturing.” Drop it from your evaluation. Redirect that time toward verified ISO-certified coverall manufacturers with documented compliance credentials.

5. Morntrip

Twenty years in the PPE supply chain teaches you things no catalog can. Wuhan Morntrip Trading Co., Ltd. — operating under the brand Morntrip — has been building that knowledge since the early 2000s. That’s when China’s nonwoven PPE industry was still finding its footing after SARS.

Based in Wuhan, Hubei, Morntrip runs a 101–200-person team covering both manufacturing and international trade. That structure is deliberate. The business is built around full-spectrum PPE sourcing — not pushing one product line, but knowing which factory in China does what best.

Their own words put it well: “We know which suppliers excel in different products.” That’s the kind of sourcing intelligence most distributors simply don’t have.

What they offer PPE buyers:

• Disposable coveralls and isolation gowns — core for medical, industrial, and emergency response purchasing

• Surgical masks, filtering respirators ( FFP2/FFP3/N95 ), and rubber gloves — a complete PPE bundle from one source

• OEM/ODM capability for private-label operators who need custom packaging without high MOQs

• Active market reach across North America, South America, Europe, the Middle East, and Southeast Asia

For Mexican buyers, Morntrip works as a direct-access Chinese OEM partner. That matters for distributors who want to cut out middleman markups. You still get a supplier with a real export track record and cross-regional compliance experience.

Where to apply caution: Morntrip’s public documentation does not list specific EN Type 5/6 CE certificate numbers or ISO 13485 registration details up front. Before placing an order, ask for their NMPA registration certificate, any current CE MDR documentation, and third-party test reports for the coverall grade you need. That 30-minute check is non-negotiable for regulated procurement.

Best fit: PPE distributors and private-label operators in Mexico buying multi-category disposable PPE at volume — those who need one Chinese supplier to bundle coveralls, masks, and respiratory protection into a single consolidated shipment.

6. HG Supply

HG Supply has no business being on this list. And that’s not a criticism — it’s a data problem.

Every credible public source points to the same conclusion. “HG Supply” in PPE sourcing is a dead end. The closest match is HG Sply Co. — a Texas-based restaurant and lifestyle brand. They run locations in Dallas, Fort Worth, and Trophy Club. Clean food, craft cocktails, organic menus. Their biggest claim to fame is an 8,000 sq ft Alliance location with an 800-car parking garage next door.

That’s not a disposable coverall manufacturer. That’s dinner.

Here’s what they don’t have:

• EN certifications

• Nonwoven production lines

• Mexico operations

• OEM capability

• Any connection to Type 5/6 chemical protective clothing, SMS coverall manufacturing, or ISO-certified PPE supply

So how did this name show up? A search algorithm caught keyword overlap between “HG Supply” and industrial supply categories. It flagged the name. It landed on your radar. That’s all that happened. The fix is straightforward — pull it from your evaluation list now.

For PPE buyers: HG Supply is not a verified disposable PPE suit factory or non-woven coverall producer — not in Mexico, not anywhere. Drop it. Move on.

6-Supplier Comparison Matrix: Compliance Depth × OEM Flexibility × Cost Competitiveness × Supply Reliability

Six suppliers. Four dimensions. One decision.

You’ve seen each supplier profiled on its own. Now put them side by side. Not in paragraphs—in a format you can use during an RFQ meeting.

The matrix below scores each supplier across four dimensions that matter most to industrial PPE buyers in Mexico:

• Compliance depth — certification portfolio and protection class range

• OEM/private-label support — flexibility for custom branding

• Price tier — FOB or DDP Mexico benchmark for Type 5/6 disposable coveralls

• Supply reliability — on-time delivery consistency, local stock depth, and risk of disruption

Supplier	Compliance ★	OEM Support	Price Tier (Type 5/6)	Mexico Supply Reliability	Lead Time	MOQ
DuPont / Tyvek	★★★★★ — Type 3/4/5/6, EN 14126, ISO 9001	❌ No	$$$$ — >US$4/pc	Very High	Stock: 3–10 days	50–200 pcs/batch
Ansell / AlphaTec	★★★★★ — Type 3/4/5/6, heavy chemical	❌ No	$$$–$$$$ — ~US$3–8/pc	High–Very High	Stock: 3–7 days	25–50 pcs/box
Asian OEM – China	★★★★ — CE Type 5/6, EN 14126, ISO 9001/13485	✅ Yes	$–$$ — US$1.0–1.8 FOB	Medium–High	45–60 days total	3,000–5,000 pcs/style
Asian OEM – SEA	★★★ — Type 5/6, limited Type 4	✅ Yes	$ — US$0.9–1.4 FOB	Medium	55–75 days total	5,000–10,000 pcs/color
Mexico Local Converter	★★–★★★ — Type 6 / non-certified base; imports for higher grades	⚠️ Limited	$$ — US$2–3/pc domestic	High	Stock: 3–5 days; custom: 10–20 days	500–1,000 pcs
Morntrip (China OEM)	★★★★ — CE-capable, FFP2/FFP3, multi-category PPE	✅ Yes	$–$$ — competitive FOB	Medium–High	Sample: 7–10 days; production+shipping: 45–60 days	Flexible; verify per SKU

How to Read This Matrix Fast?

Compliance depth makes the first cut. Your RFQ specifies Type 3/4 chemical protection? That covers lab environments, agrochemical exposure, and high-concentration acid/alkali contact. Only DuPont and Ansell hold solid multi-standard portfolios with no verification risk. Every other supplier needs closer checking.

OEM flexibility makes the second cut. Global brands don’t do private label. That’s a hard line. Custom packaging and logo branding are part of your model? Your options are Asian OEM suppliers or Mexican local converters. Those are the only two paths.

Price tier shapes your real shortlist. Here’s how it breaks down:
– $$$–$$$$ : Global brands, premium compliance, zero OEM flexibility
– $$ : Mexico local supply, fast delivery, limited certification depth
– $–$$ : Asian OEM, full customization, longer lead times

Supply reliability is your risk buffer. Local converters and regional distributors win on speed. Asian factories win on cost. That gap hurts most when your shutdown maintenance needs a 3-week turnaround and your container is still crossing the Pacific.

Quick filter by buyer type:
– Type 3/4 chemical exposure → DuPont or Ansell, no negotiation
– Private-label distributor → Asian OEM (China preferred for lower MOQ); check EN certificates before placing any order
– Domestic fast-fill → Mexico local converter; confirm which grades are self-produced vs. imported
– Multi-category PPE bundle → Morntrip; request CE documentation upfront

What PPE Buyers Should Know Before Sourcing Disposable Coveralls in Mexico?

Mexico’s protective clothing market hit USD 182.65 million in 2020—and it’s heading toward USD 250.25 million by 2027. That growth pulls in suppliers. Lots of them. And not all of them are what they claim to be.

Here’s what you need to know first: most “disposable coverall manufacturers in Mexico” aren’t making anything in Mexico.

The market is fragmented. You’ll run into three types of sellers:

• Brand-authorized distributors — Mexican companies with regional rights to sell DuPont Tyvek, 3M, Lakeland, and similar brands. Expect MOQs of 50–200 pcs per size.

• Regional converters (“convertidores”) — They buy imported PP/SMS/PE nonwoven rolls and cut-and-sew in-country. Most don’t hold direct EN or NFPA certifications. They lean on material-level test reports instead.

• Import traders — Finished Chinese or U.S. coveralls, re-boxed under a Mexican brand. Watch for phrases like “fabricado para México” —that means manufactured for Mexico, not in Mexico. Big difference.

How to Tell the Difference?

A real Mexican OEM coverall manufacturer owns cut-sew-seal lines on Mexican soil. They can show you a plant address on their IMSS registration, maquila program credentials, and EN/NFPA certificates that list a Mexican legal entity as the manufacturing site.

A supplier serving Mexico? Their certificate’s “manufacturing site” field will show China, India, or the U.S.

Request the full CE certificate and check that field first. It takes 30 seconds and cuts out 80% of the confusion.

The Compliance Stack That Counts

For industrial buyers, NOM-017-STPS-2008 sets the regulatory baseline. In practice, EHS managers at multinationals and petrochemical sites push further—they write EN Type 5/6 or Type 3/4 straight into their RFQs.

Match your standard to your hazard:

Use Case	Minimum Standard
Dust / maintenance / light splash	EN Type 5/6 (EN 13982 / EN 13034)
Chemical handling / agrochemicals	EN Type 3/4 ( EN 14605 )
Healthcare / infectious disease	EN 14126 or NFPA 1999
Oil & gas / cross-border hazmat	NFPA 1994/1990

Price and Lead Time: Set Realistic Expectations

Basic SMS Type 5/6 from Asian suppliers lands at under USD 2/pc FOB. Run it through a distributor chain to end-users in Mexico, and you’re looking at USD 3–6/pc—depending on volume and certifications.

Tyvek or NFPA-certified chemical suits? Budget USD 8–15/pc for smaller orders—sometimes more.

On lead times: local distributor stock covers a few weeks of demand at best. Non-stock items or custom sizes run 6–12 weeks from order to delivery. Got seasonal peaks—shutdowns, turnaround maintenance, harvest cycles? Lock in framework agreements at least 3–4 months ahead.

Conclusion

Finding the right disposable coverall manufacturers in Mexico is straightforward. You just need to know where to look.

The six disposable coverall manufacturers covered here cover the full range of what the market offers. On one end, you have compliance-focused distributors like MEDEV and Grupo Alyger. On the other hand, OEM-ready factories like Morntrip can grow alongside your private label needs.

Your final choice comes down to three things:

• Certification depth — does it match your industry’s regulatory requirements?

• Supply reliability — will your crews stay protected without interruption?

• Pricing — does it protect your margins over the long run?

Smart procurement managers don’t chase the lowest quote. They chase the supplier whose compliance documents, MOQ terms, and customization options match where their operation is going next. That’s the move worth making.

Ready to shortlist your top two candidates and request samples? Start there. One solid supplier relationship — built on verified specs and honest communication — beats a dozen unvetted options piling up in your inbox.